PET ( polyester ) 50 dyne or more; NY (nylon) 52 dyne or more; BOPP 38 dyne or above.
1. The product is general-purpose, PET , BOPP , and nylon are common. There is no need to replace the ink, and different ink systems are used to reduce the purchase diversity and reduce the ink inventory.
2, strong tinting strength, bright color, good gloss.
3, good adhesion, solvent-free composite, dry composite, high composite strength.
4, good printability, excellent transfer of shallow mesh, very low solvent residue, printing speed of 80-250 m / min.
1, viscosity: 12 - 40 seconds ( 3 # ) Temperature: 25 °C
2 , fineness: ≤ 15um
3 , the use of solvents: esters, alcohols, etc.
Note: The thinner formula can be adjusted according to the machine speed and oven drying performance. Recommended viscosity for printing: white ink 13-14 seconds, color ink 14-16seconds, spot color 16-20 seconds. The printing viscosity is actually adjusted according to the machine speed and the printing plate.
1, it is recommended to check the dyne value of the substrate before printing to ensure the printing effect and adhesion.
2. The viscosity and solvent ratio can be adjusted according to the machine speed and the oven temperature.
3. Shake the ink evenly before use.
4. If you have any questions, please contact our technical department.